Key points for transportation and placement of resin cutting sheets

For many abrasive products, such as resin wheels, diamond wheels, and cut off disc for stainless steel, knowledge of handling and storage is very important. The resin cutting piece will be transported or stored for long distances as needed. If you do not pay attention, it is likely to cause huge losses due to improper storage. Therefore, in order to ensure that it will not affect its use in this process, we will introduce the product handling knowledge and precautions:    
 First, it should be stored in a dry place, the room temperature should not be lower than 5 degrees Celsius, and the storage time should not exceed one year. The cutting piece that exceeds the period should be inspected before use. The modified cutting piece should also be used after re-spinning test.     
Second, long-distance transportation should be properly packed in wooden boxes, and the cutting pieces should be separated by soft materials such as straw and sawdust to prevent collision and impact.     
Third, should be placed separately according to the specifications, the store is equipped with signs to avoid confusion and errors, the placement method should be based on the size of the grinding. Large or thick diameter cutting blades shall be placed upright and slightly inclined, but shall not be inclined and pressed for a long period of time to prevent deformation; thinner and smaller grinding wheels shall be placed flat, but not too high, and on them A flat iron plate is placed under each of them to prevent the cutting piece from being deformed or broken.     
Fourth, it must be completely packaged and transported to avoid collisions. It should not be exposed to moisture for a long time, and it should not be in contact with alkalis;     fifth. To avoid direct contact with the ground, it must be piled on the wooden pallet with moisture barrier. The height from the ground is 10-15cm, and the stacking height is not more than 1 meter.   
  Sixth, the implementation of advanced first-use principles to ensure the best trial period of products.
Publicado en Car en noviembre 09 at 03:01

Comentarios (0)

No login