The most common Brick Repair Services Nashville chimney structure is the brick chimney and they come in sizes that very from just 1 foot diameter to 12 feet diameter. Chimneys have to be regularly checked to check condition and cleaned so that hazardous debris is cleaned out. At times, some bricks may have chipped off or broken and as such it is necessary to carry out necessary repairs on the structure.
Repairing the Masonnry Repairs in Nashville chimney structure needs utmost caution as some pars can be worn out and so unstable. The first thing to do is remove debris in the form of broken bricks and mortar. It is possible to remove loose brick and mortar by hands itself. A brick chisel and hammer can be used to break away broken bricks that are lodged strongly in the structure. After removing such bricks, sweep away the dust using a brush.
Wet the area that has to be replaced with a new brick. Take type N mason cement and sand and mix both in a 1 to 2 proportion. Put these ingredients into a wheelbarrow and dry-mix at first, and then add water gradually till the mortar is as smooth as mud.
Apply this using on the new brick and then tuck the brick into the right position. Press a 2 x 4 wood piece against the wall to ensure that the brick is set correctly with the ones around it. Apply mortar over the joint to seal the new brick off completely. Check the chimney for holes and seal these holes using refractory cement. You can apply them over joints using a trowel or a gloved hand.
If the repair work that has to be done to the chimney is extensive, it is necessary to get a professional to accomplish the task. Take assistance from a licensed professional to ensure quality repair work.