Just because you have never done any plumbing before, do not automatically assume that you cannot. Replacing a drain is a really good project for a novice plumber. So when your bathtub drain starts leaking instead of calling a plumber, you can try making the repair yourself. If you are at all handy around the house, you can easily replace your drain. You may find that you enjoy plumbing, not to mention that you will save a nice little chunk of money as well.Preparations for Replacing the DrainWhenever you are working in sinks and bathtubs it is a good idea to put something like a towel or a drop cloth in the tub to protect it from getting scratched by any tools. It is simply too easy to drop a tool while you are working, and it is easier to prevent a chip than it is to repair a chip. Then you will want to get your tools together like a screwdriver, pair of pliers, wrench and anything else that you think you may need.
You also want to have a stack of rags and towels close by.Types of Bathroom Drains and How to Remove ThemThere are several different types of bathtub drains. So depending on which type you have the process will be a little different. One common type of drain is the trip lever style stopper. There are two different types; one with a plunger and one that is a pop up. If your drain has a plunger, when you move the lever a plug down in the pipe engages. All you need to do to remove this drain is unscrew the faceplate and pull the whole drain out. If you can tell that the stopper is bad, you can probably get away with just replacing the stopper. Then reinsert the mechanism and screw it in place.With the pop up style of drain, before doing anything you need to adjust the lever. Make sure that the stopper is at the highest level, and then remove the stopper. To do this pull it straight out or twist and lift.Some drains do not have a lever. With a roller ball or foot lock style drain all you Home Decorative Sofa Upholstery Fabric Manufacturers have to do is turn it counterclockwise and pull. There are some drains that need to have a set of screws loosened before they will come out, so always check for this first.Remove the StrainerWhen you look into the drain you should see crossbars.
If they are in the flange, then you can use pliers to remove the drain. Simply use the pliers to turn the drain counterclockwise and unscrew it with your screwdriver.If there are no crossbars, then you need a special tool that fits into the flange to spread and tighten against the wall of the drain. Then you can turn the flange counterclockwise and remove it.ReassembleAfter pulling everything out, the hard part is done. Now you need to wash any fixtures that you are going to reuse. Vinegar and baking soda makes a good cleaning solution. Put some plumber's putty underneath the strainer lip before screwing it back into place. This will make a waterproof seal for your drain. Put all of the parts of the drain back in the reverse order that you removed them and your project is complete.